YGE · RC Segelflug

YGE 35 LVT ESC with Telemetry

Compact brushless ESC with telemetry and an adjustable BEC for your RC sailplane.

YGE 35 LVT electronic speed controller

Compact brushless ESC

At 34 × 23 × 8 mm and 25 g including cables, the YGE 35 LVT fits into slim fuselages. It works with 2–6S LiPo or LiFe packs and combines motor control, receiver and servo power, and telemetry.

I’ve used this ESC very successfully for many years.

Anna Schütz · Flying with Anna

The YGE 35 LVT pairs well with the F5J PRO Motor #1. Mode 4 brakes the propeller after motor shut-off so a folding propeller can fold. The ESC is rated for 35 A continuous with good cooling and 60 A briefly. Check current under load with your battery and propeller.

€119.95

incl. 19% VAT, plus shipping

Includes: 1 × YGE 35 LVT

Order by email

Six operating modes

Select the mode on your transmitter to load the presets and teach the throttle endpoints.

ModeApplication
1 · External governorAn external system controls RPM.
2 · GovernorThe ESC controls RPM.
3 · Governor StoreThe internal governor uses a learned reference.
4 · Powered flight with brakeFor sailplanes and other fixed-wing models that need propeller braking.
5 · Powered flight without brakeThe propeller can coast to a stop.
6 · Powered flight with acro brakeAdjustable braking for aerobatic models.

Telemetry and compatible systems

The ESC reports battery voltage, current, consumed capacity, RPM, temperatures, BEC voltage and controller output. The displayed values depend on your system and protocol.

SystemTelemetry requirements
Jeti, Graupner HoTT, MultiplexCompatible telemetry receiver and protocol.
Futaba, FrSky, Spektrum, PowerBox COREYGE TexY required for telemetry.
VBar Control/VStabi, Brain, SpiritFunctions depend on system integration.

YGE lists VBar Control, Jeti, Graupner HoTT and PowerBox CORE for changing selected parameters from the transmitter, depending on integration and firmware.

Setup with YGE Connect

Use YGE Connect and the optional USB adapter to select the telemetry protocol, set BEC voltage, and tune start-up and braking. You can read logged flight values and faults, save settings and update firmware. The ESC monitors current and temperature and can reduce power or stop the motor if it overheats.

Technical specifications

FeatureYGE 35 LVT
Continuous current35 A with good cooling
Peak current60 A briefly
Battery range2–6S LiPo or LiFe
BEC output5.5–8.4 V adjustable; 5 A continuous, 10 A briefly
Weight25 g with cables
Dimensions34 × 23 × 8 mm
Wire size (battery/motor)2.5 mm² / 1.5 mm²
Anti-sparkNot integrated
Battery typesLiPo and LiFe
ProgrammableYes
TelemetryIntegrated; TexY required for some systems

Match the BEC voltage to all connected components. See the instructions before using a backup battery or second receiver supply: the 35 LVT lacks the reverse-current protection circuit described for larger models.

Operating instructions (PDF) · YGE Connect & Downloads

Frequently asked questions

Does the YGE 35 LVT support telemetry?

Yes. You can read values such as voltage, current and consumed capacity. Futaba, FrSky, Spektrum and PowerBox CORE require TexY.

How much current can the ESC handle?

35 A continuous with good cooling and 60 A briefly. The separate BEC ratings are 5 A continuous and 10 A briefly.

Can I use it with the F5J PRO motor?

Yes, it pairs well with the F5J PRO Motor #1. Check that your battery and propeller combination stays within the current limits.

Which mode should I use for a sailplane?

Mode 4, powered flight with brake, is the starting point for a folding propeller. Fine-tune braking in YGE Connect.

Do I need a USB adapter?

Not for basic mode selection. For advanced PC settings, use the optional YGE USB adapter.

Product safety and manufacturer contact

YGE GmbH · Heino Jung
Otto-Hahn-Str. 1A
49134 Wallenhorst, Germany
info@yge.de

Questions & orders

Want to order the YGE 35 LVT or find out whether it suits your model? Email me at anna@flyingwithanna.de.