Knowledge & Tips · Loggers & competition

F5J loggers 2027Which loggers are still approved?

Background, approved altitude loggers and practical tips for the transition to the 2027 F5J competition season.

Many F5J pilots currently have questions about loggers for the 2027 competition season. Which devices are still approved? Why can the widely used Altis no longer be used? And what should you consider when switching?

I already touched on this subject in my article F5J competitions 2027: 7 steps to prepare for the season. Here I take a closer look at the background, introduce approved F5J loggers and share practical tips for the transition.

01

Technical background: why several F5J AMRTs are becoming obsolete

The cause is faulty firmware: it passes control signals to the electronic speed controller (ESC) even below a pulse width of 1.2 ms. However, detection of the motor running — and therefore monitoring of the maximum motor run time of 30 seconds — only starts once this threshold is reached.

As a result, the motor may already be running without the altitude logger (AMRT) detecting it, shutting it down after 30 seconds or triggering the altitude recording used to determine the F5J start height. Modern power systems can deliver enough power for a climb even below this threshold.

For an F5J start height to be recorded at all, the pilot would have to briefly switch the motor on again later in the flight and exceed the detection threshold. If this happens at low altitude, a correspondingly low start height may be displayed, even though the motor was already used for a climb earlier in the flight.

GliderKeeper PRO and Altis side by side
GliderKeeper PRO and Altis side by side
02

Which F5J loggers remain approved in 2027?

The table lists the AMRT devices and firmware versions for the 2027 season according to the list supplied for this article.

AMRT devices · list dated 28 September 2026
ManufacturerLoggerFirmware
GliderKeeperGliderKeeper PROF v5.42 / S v5.42
RC ElectronicsFalconXF1.18 / S1.18
MAV SenseMAV Sense AMSF1.06 / S1.06
Esprit TechElite AMSF1.06 / S1.06
HEPF ModellbauHEPF AMSF1.06 / S1.06
Opale ParamodelsOptronics AMSF1.06 / S1.06
RC ElectronicsFalconF1.18 / S1.18
GliderKeeperGliderKeeperF v5.42 / S v5.42
GliderKeeperGliderKeeper V2F v5.42 / S v5.42
GliderKeeperGliderKeeper PicoF v5.42 / S v5.42

Source: FAI EDIC, F5J AMRT Approval List, dated 28 September 2026; list received by email.

The list shows that several manufacturers continue to offer approved F5J altitude loggers.

03

Measuring altitude and flight time: modern F5J loggers

If the new requirements mean you need to change your logger anyway, it is worth considering a combined altitude and flight-time logger.

Two interesting devices are the GliderKeeper PRO and the FalconX from RC Electronics.

Both are very compact and can display flight time as well as F5J start height. They therefore perform two important tasks during an F5J flight.

This is especially useful in training. After landing, you can immediately check how long the flight lasted and what start height was recorded.

Both loggers also have a smartphone app. These can be used to change settings, perform firmware updates and analyse recorded flights.

Flight recordings are useful beyond competition flying too. Hobby pilots can review their flights and see, for example, how altitude changed during a thermal flight.

A modern altitude and flight-time logger is therefore both a competition device and a useful tool for everyday training.

GliderKeeper PRO and FalconX size comparison
GliderKeeper PRO and FalconX size comparison
04

What should I check as an F5J pilot?

If you plan to enter FAI F5J competitions in 2027, check in good time whether your logger is still approved.

The device model is not the only consideration: the installed firmware matters too. An approved logger must be operated with an appropriately approved firmware version.

Before your first competition, check two things:

  • Approval: Is my logger included in the current FAI list?
  • Firmware: Is the approved firmware version installed?

With a new logger in particular, it is a good idea to complete a few test flights before your first competition.

05

Tips for switching to a new F5J logger

If you need a new logger, do not leave the change until the first competition of the 2027 season.

Switching during the winter gives you enough time to become familiar with the new device.

A YouTube video is available for GliderKeeper. Manuals are also available for the different loggers, explaining setup and operation step by step. Use the guides and videos to get familiar with the functions and prepare for the 2027 season.

06

Help with the transition — Flying with Anna

I want the transition to the new loggers to be as straightforward as possible, without disrupting F5J competition flying.

That is why I would like to support pilots through the change. Feel free to contact me with your questions.

Through Flying with Anna, I offer a range of GliderKeeper loggers and help with operation and settings. Alongside the device, you benefit from personal advice and helpful instructional videos.

Please email me with any questions or orders.

See you at the flying field!

Anna — Flying with Anna

Read my article on F5J competitions in 2027.

anna@flyingwithanna.de

Explore GliderKeeper PRO →
GliderKeeper PRO in the foreground, Anna in the background
GliderKeeper PRO in the foreground, Anna in the background

← All Knowledge & Tips articles